Looking for a way to reduce lawn maintenance and still enjoy a green outdoor space? Artificial grass provides a clean and tidy look throughout the year. With the right steps and preparation recommended by the top artificial grass suppliers in Dubai, it is possible to install synthetic turf that looks natural and remains durable in various weather conditions.
Measure the area carefully
Start by measuring the backyard space where the artificial grass will go. Accurate measurements allow for correct cutting and fitting. Consider any curves, corners, or features like trees and garden beds. Having a clear sketch or outline helps in planning the layout before any material is placed.
Prepare the ground surface
The existing grass or soil should be cleared out first. Remove rocks, roots, and debris to create an even surface. Once the area is cleared, a slight slope may be created for drainage purposes. Level the ground as smoothly as possible to avoid uneven patches under the grass.
Add a base layer
After clearing, a base layer such as crushed stone or compacted sand is added. This forms the foundation and supports the turf. Spread the material evenly and compact it using a plate compactor or hand tamper. The surface should be stable, smooth, and firm to hold the grass in place.
Install a weed barrier
Before laying the artificial grass, roll out a weed barrier across the prepared surface. This fabric helps reduce the growth of unwanted plants beneath the turf. It also adds a layer of support and separates the base from the grass layer.
Lay and adjust the grass
Roll out the artificial grass carefully across the area. Ensure the direction of the blades faces the same way for a uniform look. Trim the edges using a sharp utility knife, fitting the grass neatly around corners and borders. Adjust the sections so there are no visible gaps or overlaps.
Secure the edges
Fix the turf to the ground using nails or landscape pins. Place them along the perimeter and at intervals across the area to keep the grass in position. Press down the edges firmly to avoid lifting or curling. Seam tape or adhesive may be used to join different pieces of turf.
Brush and settle the grass
Once the grass is laid and secured, brush the surface using a stiff broom. This lifts the blades and helps them stand upright. Infill material such as silica sand may be added to improve stability and support the blades. Watering the surface lightly settles the material and gives the turf a natural appearance.
